#Tv pilot universal fernbedienung manual manual#
#Tv pilot universal fernbedienung manual full#
#Tv pilot universal fernbedienung manual tv#

The IR feature is required to send signals from your phone to the TV set just like a normal TV remote.

#Tv pilot universal fernbedienung manual manual#

Note: Old Supertel remotes require 4 digit codes - use the Universal Autosearch method described above for these remotes if you can't find your user manual with the code lists.The No.1 Universal TV Remote Control - Smart and IR Remotes App in more than 100 countries.ДЇor Smart TVs / Devices, the only setting required is to connect your phone as well as your Smart TV / Device to the same Wifi network.ДЇor IR TVs, your phone must have a built-in Infrared (IR) feature for the app to work as a remote control.

Between digits there will be a pause of 2 seconds.ДЎ short flash - pause- 1 long flash - pause - 2 short flashes. Zero is indicated by a long single flash. The sum of short flashes will indicate the number in that digit. Count the number of flashes in each of the 3 digit code. Step 3: As soon as the '?' button is pressed the LED will start flashing. Step 2: Press the '?' button (CODE/? or SHIFT+CODE key on new models). Step 1: Press the device button with the unknown code. It is possible to identify the code number that has been programmed into one of the 5 device buttons following the steps below: Step 6: If you do not press any button for 10 seconds, the code is selected and memorized automatically. If it's not working correctly, press and release the 'CODE' button again to continue with automatic search. Turn on the device in question and make sure that all functions are working correctly. Step 5: When the device to control switches to standby mode, immediately press any button. Press and release 'CODE' key again to start the automatic scanning. Step 4: Direct your remote towards your device. Step 3: Press 'CODE' and keep it pressed until the LED indicator flashes, then release. Step 2: Press the device select buttons (TV, VCR, SAT. In case of a VCR or a HI-FI turn on the device, and insert a cassette or disc. Step 1: Turn on the device (TV, VCR, SAT. The model will be memorized and the indicator LED will flash 4 times.

your TV) turns off - stop pressing the OFF button immediately. Step 6: When the equipment under test (i.e. The LED will flash as different models are searched. As soon as the OFF key is pressed, the remote starts covering the device range (TV, VCR, etc.) according to the device preprogrammed at that location. Step 5: Press the OFF key, and keep it pressed until the device turns off, or in case of a VCR or HI-FI a change takes place. Step 4: Direct your SUPERTEL remote towards your device. Step 2: Press one of the five program device buttons (TV1, TV2, VCR, AUX or SAT) corresponding to your equipment or by using the 'DEVICE SELECT' button choose your device location to program your equipment (TV1, TV2, VCR, etc.).

The Universal Autosearch method for Supertel universal remotes Autosearch (v.1) If you can't find a working code four your device, try one of the Universal Autosearch methods described below: If after activating steps 2 and 3, step 4 is not activated for 10 seconds, then the programming mode is deleted. In this case the LED will stay off until you press the CODE button again and enter a good code. If the code is not acceptable, the LED will turn off immediately. If an acceptable code is entered, the indicator LED will flash rapidly 4 times. Step 4: Enter the 3 digit code for your equipment using the number keys. Step 2: Press one of the device select buttons(old models) or by using the 'DEVICE SELECT' button choose your device location to program your equipment (TV1, TV2, VCR, etc.). Step 1: Look up the code for your device using the search box above. Search your SUPERTEL code by selecting your equipment's brand and/or entering the model in the form below: It comes pre-programmed with the majority of TV, VCR, DVD, DVR, PayTV, SatTV, etc.

#Tv pilot universal fernbedienung manual full#

It has a full key layout with teletext and other rarer buttons. Supertel universal Pilot Remote Control is a quality European made product by Pilot with positive action, clearly labled plastic buttons replacing up to 5 remote controls.